Fupower Custom Auto Parts Manufacturer - Best Racing parts manufactuer in China
Air Intakes
The VQ35DE is an engine that deserves to be heard. Nissan buried its induction note under a plastic airbox and a maze of resonator chambers designed for silence, not power. This Short Ram Air Intake Kit peels all of that away — a straight, short intake path from filter to throttle body that drops restriction and uncages the VQ's natural growl.
The R56 engine bay is a heat trap. The factory airbox pulls air through a restrictive paper panel filter inside a black plastic housing that heat-soaks within minutes. On a tuned N14 or N18, this is the first bottleneck. This High Flow Cold Air Intake Kit replaces the entire factory airbox with a sealed aluminum heat shield and a high-flow reusable cone filter. More air, colder air, zero cutting.
The B48 is a sharp, efficient turbo engine — but its factory intake is designed for one thing: silence. The convoluted plastic airbox and restrictive panel filter starve the turbo of airflow right where it matters most: off idle and through the mid-range, where boost should be building. This B48 Cold Air Intake System removes the bottleneck and lets the turbo breathe.
N63 FRONT MOUNT INTAKE
The MQB intake market is crowded with 3-inch kits that claim to be an upgrade. But start logging mass airflow on a tuned EA888 Gen 3 pushing 400+ horsepower, and a 3-inch tube quickly becomes the next bottleneck. This 3.5-Inch Cold Air Intake System preempts that ceiling — oversized from the turbo inlet to the filter, so the intake is never the weak link in your setup.
"Unleash the full power and throttle response of your machine with our Premium Cold Air Intake Kit, specifically precision-engineered for the Polaris RZR XP 1000 (2014-2019). Designed to replace the restrictive factory air box, this high-flow system provides a direct path for cooler, oxygen-rich air to reach your engine. Whether you are racing through open dunes or tackling technical trails, our intake kit ensures your RZR maintains peak performance while providing superior filtration against the harshest off-road elements."
The RZR 900 and S 1000 pull hard off the line, but when you're pinned through a sand wash or climbing at altitude, the factory airbox becomes the first thing to hold you back. This Aluminum Velocity Intake replaces the entire restrictive intake tract with a high-flow, velocity-stack design that feeds the engine the air it needs when the throttle is buried.
The N55's factory intake is quiet — deliberately so. But quiet comes at a cost: a convoluted airbox, restrictive panel filter, and enough baffling to choke the turbo's appetite for air before it even starts spooling. This Performance Air Intake System strips the intake tract back to what the N55 actually wants: a short, straight, high-flow path from the factory cold-air duct to the turbo inlet.
Turbos Charge Pipe Cooling Kit
E8X E9X air intake pipe
E92 Turbos Charge Pipe
E8X E9X air intake pipe
E92 Turbos Charge Pipe
"Elevate the reliability and technical aesthetics of your Biturbo V8 to professional motorsport standards with our Premium Titanium Charge Pipe Kit. Specifically precision-engineered for the S63TU engine in the BMW F10 M5 and F06/F12/F13 M6 (2012-2017), these charge pipes replace the failure-prone factory plastic units. Manufactured from aerospace-grade Grade 1 Titanium, this kit is designed to handle the extreme induction pressures of high-boost V8 engines while adding a stunning, high-tech visual centerpiece to your engine bay."
"Elevate the reliability and technical aesthetics of your Biturbo V8 to professional racing levels with our Premium Titanium Charge Pipe Kit. Specifically precision-engineered for the S63TU engine in the BMW F10 M5 and F12/F13 M6, these charge pipes replace the failure-prone factory plastic units. Manufactured from aerospace-grade Grade 1 Titanium, this kit is designed to handle the extreme induction pressures of high-boost S63TU engines while adding a stunning, high-tech visual centerpiece to your engine bay."
G80 G82 INTAKE KIT
M3 M4 DOWNPIPE
G8X SILICONE INTAKE
M3 M4 DOWNPIPE
G8X SILICONE INTAKE
GET IN TOUCH WITH US
Contact person: Frank
Contact number: 0086-18721636174
Email: sales@fupower.com
WhatsApp: 0086-18721636174
Company address: Room 806, Building 17, 2255 Yueluo Road, Shanghai, China
Contact us
Leave your inquiry, we will provide you with quality products and services!
Contact us
email
Contact customer service
Contact us
email
cancel
Customer service