Upgrade your 2011–2016 Ford Super Duty 6.7L Powerstroke with this heavy-duty intercooler pipe and boot kit, designed to replace failure-prone factory plastic pipes and weak rubber boots.
Features mandrel-bent polished aluminum pipes for smooth, unrestricted airflow, eliminating factory bends that choke power. Equipped with 5-ply reinforced silicone boots (heat/oil resistant) and constant-tension T-bolt clamps to prevent leaks under boost.
Dyno-proven to improve airflow, lower EGTs, and boost throttle response—no tuning required. CNC-machined OEM-style flanges ensure direct bolt-on installation with all hardware, O-rings, and sensors included.
Built for durability: corrosion-resistant aluminum, high-temperature silicone, and stainless steel clamps withstand harsh diesel engine conditions. Ideal for towing, daily driving, and performance builds.

Performance intercooler pipe kit exclusively for 2017–2024 Ford F-250/F-350/F-450 Super Duty 6.7L Powerstroke diesel. Mandrel-bent 6061 aluminum tubing replaces fragile factory plastic pipes, delivering 47% improved airflow, eliminating boost leaks and cracking issues for reliable heavy towing performance.

Premium 6061-T6 aluminum hot side charge pipe exclusively engineered for 2023-2024 Toyota Sequoia 3.4L V6 Twin Turbo Hybrid (V35A-FTS engine). Replaces restrictive stock plastic factory piping to eliminate boost leak and pipe expansion issues under high boost. 2.5-inch mandrel bent seamless tubing cuts airflow turbulence for improved turbo spool and throttle feedback. Complete kit includes 5-ply reinforced silicone couplers and stainless steel heavy-duty T-bolt clamps, available in matte raw aluminum or black/red powder coated finish for direct bolt-on installation without modification. Pre-tapped 1/8"NPT bung reserved for boost gauge or water methanol injection setup.

This cold air intake is built for 2016-2023 Chevy Camaro SS 6.2L V8, equipped with a premium oil-free dry filter. It boosts airflow, cuts daily maintenance work, enhances throttle sensitivity and creates a distinct aggressive intake tone for street driving.

Complete performance cold air intake kit with high-flow reusable air filter, tailor-made for 2018–2021 Jeep Wrangler JL and Jeep Gladiator JT equipped with 3.6L Pentastar V6 engine. Smooth mandrel-bent aluminum intake tubing eliminates airflow limitations of the factory plastic airbox, delivering cooler, denser air to the engine. The premium multi-layer washable filter maximizes airflow while blocking trail dust, mud and debris. This simple bolt-on upgrade sharpens throttle response, lifts low-end torque and power for daily driving, rock crawling and highway cruising. All silicone boots, stainless clamps and mounting hardware are included for straightforward installation without cutting or drilling.

Complete performance cold air intake kit matched with a premium reusable high-flow air filter, exclusively engineered for 2012–2018 Jeep Wrangler JK 4WD equipped with 3.6L Pentastar V6 engine. Smooth mandrel-bent aluminum tubing removes airflow bottlenecks from the restrictive factory plastic air box, drawing cooler denser ambient air into the combustion chamber. The multi-layer cotton air filter delivers outstanding airflow while blocking trail dirt, sand and mud. This bolt-on upgrade enhances horsepower and low-range torque, ideal for daily commuting, highway driving and heavy off-road rock crawling. All silicone boots, mounting brackets, stainless clamps and installation hardware are fully included with no cutting or drilling required.

Performance cold air intake kit for 1999.5-2003 Ford Super Duty F250/F350/F450/F550 with 7.3L Powerstroke Diesel. Replaces restrictive factory airbox for +12 HP & +43 lb-ft torque gains, lower EGTs, faster turbo spool and aggressive diesel sound.

Complete performance air intake assembly including smooth mandrel-bent intake pipe and fully enclosed powder-coated heat shield, custom engineered for 2019–2022 Jeep Cherokee KL equipped with 3.2L Pentastar V6 gasoline engine. The rigid heat shield fully isolates the high-flow washable air filter from hot engine bay air to deliver denser, cooler intake air, while the seamless aluminum intake pipe eliminates airflow turbulence from restrictive stock rubber air hoses. This simple plug-and-play upgrade sharpens throttle response, raises low-end torque and enhances fuel efficiency for daily commuting, highway driving and light off-road use. All silicone connectors, stainless clamps, mounting brackets and installation hardware are fully included without cutting or drilling required.

Complete performance cold air intake assembly including CNC mandrel-bent aluminum intake pipe, heat isolation shield and premium pre-oiled reusable air filter, exclusively engineered for 2008–2010 Ford F250/F350/F450 Super Duty with 6.4L Powerstroke V8 diesel engine. The smooth seamless aluminum pipe eliminates airflow restrictions of the factory plastic intake, while the enclosed heat shield blocks hot engine bay air to deliver denser, cooler oxygen-rich intake air. The oil-impregnated multi-layer cotton filter balances maximum airflow and efficient dust trapping for harsh work & off-road environments. This plug-and-play upgrade delivers measurable gains in low-end torque and horsepower for daily driving, heavy trailer towing and tuned diesel builds. All silicone boots, stainless clamps, mounting brackets and full installation hardware are included with no cutting or drilling required.

Complete performance cold air intake system equipped with a fully sealed heat shield box, exclusively designed for 2001–2004 Chevy Silverado & GMC Sierra 2500HD/3500HD with 6.6L LB7 Duramax diesel engine. Mandrel-bent smooth aluminum tubing eliminates factory airflow restrictions, while the enclosed heat shield isolates the high-flow reusable air filter from hot engine bay air to deliver denser, cooler oxygen-rich air. This bolt-on upgrade noticeably improves turbo spool, throttle response, low-end torque and fuel economy, ideal for daily driving, heavy towing and ECU-tuned LB7 trucks. All mounting hardware, silicone couplers and stainless t-bolt clamps are fully included for hassle-free installation.

Complete performance cold air intake assembly featuring mandrel-bent aluminum intake pipe, thermal isolation heat shield and premium pre-oiled reusable air filter, custom built for 2017–2019 Ford F250/F350/F450 Super Duty equipped with 6.7L Powerstroke diesel engine. The seamless smooth aluminum tube eliminates airflow turbulence and bottlenecks found on stock plastic intake piping. The fully enclosed heat shield blocks radiant engine heat to draw cooler, denser air into the turbocharger. The multi-layer oiled cotton air filter delivers outstanding dust filtration while maintaining maximum airflow, ideal for work trucks, heavy trailer towing and off-road driving. This bolt-on upgrade gains noticeable low-end torque and peak horsepower without mandatory ECU tuning. All silicone connectors, stainless clamps, mounting brackets and installation hardware are fully included for simple DIY installation.

Take your Ford Super Duty's performance to the next level with our High-Performance Air Intake System, specifically engineered for the 2011-2016 Ford F250, F350, and F450 6.7L Powerstroke Diesel. Designed to eliminate the airflow restrictions of the factory induction system, this kit provides a direct, high-volume path for cool air to reach your turbocharger. The result is a dramatic improvement in throttle response, significant gains in horsepower and torque, and a noticeable reduction in Exhaust Gas Temperatures (EGTs) during heavy-duty towing.