Prepreg Dry Carbon Fiber Rear Cage Trim Kit — Can-Am Maverick X3 2017+ | 3K Twill

Why the Rear Cage?

Think about where you sit in a Maverick X3. The cage isn't just protection — it's the frame of your entire field of view. Headlights, dune runs, race starts: the cage is always there.

The factory cage does its job structurally. But visually, it's the least finished part of the car you see most. The Fupower rear cage trim kit changes that: carbon panels that follow the cage's lines, turning the structure around you into a cockpit.

This isn't a sticker and it isn't a wrap. It's real dry carbon fiber — the same prepreg construction used for structural parts — trimmed to the X3's rear cage.

Prepreg, 3K Twill, Autoclave — the Difference Is in the Build

Not all carbon parts are created equal, and the difference is in how they're made:

• Prepreg — carbon cloth pre-impregnated with a precisely controlled amount of resin. Consistent strength, consistent weight, consistent finish. No brush-on resin variations, no weak spots
• 3K twill — the classic diagonal weave pattern that reads instantly as motorsport. Real weave in the material, not a printed film
• Autoclave curing — heat and pressure compact every layer and cure the resin uniformly. The same construction standard used for our structural carbon parts, applied to your cage trim

The result: trim that looks sharp from the driver's seat and stays sharp after seasons of sun, sand and pressure-washing.

Lightweight by Nature, Protective by Design

Carbon fiber earns its place on a performance machine twice: it's light, and it's strong.

• Weight — dry carbon adds the visual upgrade without a meaningful weight penalty, which matters on a machine that's already tuned to be quick
• Protection — the trim shields the cage surface from scratches, scuffs and UV damage, keeping the car looking fresh underneath
• Finish — the UV-protected clear coat keeps the weave from fading or yellowing in direct sunlight

You're not just changing the look. You're protecting the part of the car that takes the most abuse.

Built for the X3, From 2017 Onward

This kit is engineered for the Can-Am Maverick X3, 2017 and later — designed to follow the factory rear cage geometry, and produced in Fupower's own carbon fiber facility through the same scan-and-verify development path as our other Can-Am parts.

Give your Maverick X3 the cockpit it deserves — dry carbon, 3K twill, built to last.