Every custom part starts with a question: will it fit? The drawing says yes. The CAD model says yes. But drawings and models have a way of being wrong by exactly the amount you can't see on a screen. That's why every custom project at Fupower goes through a full-size 3D printed prototype before a single piece of metal is cut. This is what your custom part looks like before production even begins — and it's the difference between a supplier and an engineering partner.

In the previous frame of this vlog, we showed you the scan. The handheld scanner, the reflective markers, the real-world geometry captured into a digital model. That's the first half of the story.

This is the second half: the 3D printing workshop, where the digital model becomes a physical part you can hold in your hand — and test against the real car.

There's an expensive way to develop a new automotive part, and there's a smart way.

The expensive way: design on paper, cut tooling, run a prototype batch, bolt it on, discover the bend angle is 3 degrees off, redesign, recut tooling, try again. Weeks gone. Money gone.

The smart way starts on a scanning table — and it's how Fupower validates every new project before production.

A warehouse photo can say more about a manufacturer than a product shot ever could. Walk into most automotive parts suppliers and you'll find a desk, a computer, and a wall of sample boxes that may or may not represent what's actually available. Walk into Fupower and you'll find this: row after row of shelving, stacked with real inventory, wrapped and labeled, under industrial lighting that runs the length of the building. The man in the frame is standing in the middle of it — not in front of a green screen, not in a rented photo studio. He's holding a phone because in a facility this size, communication runs on mobile. He's wearing a wireless mic because when you run a factory with four production lines under one roof, you're always talking to someone.

Fupower Automotive at SEMA Show 2025: Unveiling Carbon Fiber Innovations

Welcome to our latest video on business promotion at SEMA Show, featuring the powerful Fupower technology. In this video, we will showcase our cutting-edge titanium pipes and mufflers that have been turning heads at SEMA for their high performance and durability. Stay tuned to see how Fupower is revolutionizing the automotive industry with its innovative products.

Welcome to visit Fupower in PRI Show

Our booth is：3275

Fupower colt was founded in 2014 as a solution to provide custom exhaust system, custom air intakes, and custom prefilters. The existing production plant is about 53819 sq ft, with more than 50 employees. Our customers are mainly from America, Canada, Australia, Britain, Germany, France, Italy and many other contrary, and more than 1,000 U.S. customers. we have 3 manufacturing facilities for exhausts, silicone tubes, and prefilters. These parts can be used for truck diesel ford, dodge, cars Subaru, Audi, BMW, utv, atv Polaris and can-am, snowmobile, atv Yamaha, sea doo, and other racing parts.

Fupower at SEMA Show 2025: Innovating Automotive Excellence

Fupower Showcases Groundbreaking Dry Carbon Fiber Innovations at 2025 SEMA Show

Our Warehouse