loading

Fupower Custom Auto Parts Manufacturer - Best Racing parts manufactuer in China

Fupower co.td was Formed in 2009, specializes in CUSTOM Build service for engine components including Air intakes, Cooling system, Exhaust system, Fuel system and so on.

We will Exhibit titanium fab components, Titanium pie cuts, titanium pipes, titanium exhaust, titanium flanges, titanium mufflers, custom full titanium exhausts headers, mid pipes, cat back exhausts, SUS304 exhausts pipes, stainless mufflers, stainless exhaust cat back, stainless exhaust downpipe, mandrel bent pipes, stainless pie cuts. Custom silicone turbo hoses, silicone charge tubes, silicone air intakes, intercooler hose, radiator hose, coolant hoses, turbo hose, air inlet hose, cold air intakes, air intakes, front mount air intakes, universal silicone couplers, universal silicone elbows, universal silicone straight tubes.

We often participate in famous exhibitions in the industry, know and understand new customers and develop potential customers, promote products. The exhibition provides us with a valuable opportunity to communicate with the global industry, promote the brand and seek cooperation.


Pre-Filters and Airflow: Protecting What You've Built

The least glamorous part that saves the most
Enthusiasts spend heavily on airflow — intakes, filters, and the pipework around them — then watch dust, sand, and debris quietly shorten the life of everything downstream. A pre-filter is the least glamorous part on the build sheet and often the one that saves the most. This article explains how pre-filtration interacts with airflow, where it belongs in a build, and why protecting an engine is far cheaper than rebuilding one.
2026 11 17
Jet Ski Performance Upgrades: Heat, Water and Salt
Three forces that decide how long your setup lasts
A jet ski lives in the worst possible place for machinery: an enclosed engine bay, surrounded by water, bathed in salt, and asked to run at high load for as long as the rider stays on the throttle. Anyone who upgrades a personal watercraft quickly learns that the three real problems are not horsepower — they are heat, water, and salt. Solve those and the craft becomes reliable; ignore them and every gain is temporary.
2026 11 13
Upgrading a Daily Driver: Where to Start

Modifications that respect real life
Most upgrade advice assumes the car lives in a garage and only leaves for the track. A daily driver lives a different life: cold starts, traffic, weather, passengers, and the quiet need to start reliably every morning. The best daily-driver modifications are the ones you never have to think about again. This guide covers where to begin when the goal is a car that is quicker, sounds better, and stays dependable — without turning a commute into a maintenance project.
2026 11 11
Performance Parts for the Track: What Actually Matters

A buyer's guide to spending where it counts
Every track weekend, someone shows up with a trunk full of parts and a lap time that refuses to move. The problem is almost never effort — it is priority. Heat, weight, and airflow decide more laps than any single bolt-on, yet most of the budget goes to the components that photograph well. This guide covers what genuinely matters when a car trades street duty for circuit duty, and where a carefully engineered part quietly earns its place on the build sheet.
2026 11 10
Small Batch, Big Quality: Why Low MOQ Doesn't Mean Low Standard

Small runs fail for predictable reasons — and every one of them is preventable
There is an assumption in the parts trade that small orders get small attention. It is a fair assumption, because it is often true: the same setup, the same inspection and the same documentation are being spread across very few pieces, so the shortcuts get taken where nobody is looking. A small batch is not inherently lower quality. But it is more sensitive to process discipline, because there is no volume to hide behind. Here is where small runs usually break, and what keeps them honest.
2026 11 03
OEM and Private Label: How We Work With Brands

Two paths to putting your name on a part — and how to choose between them
A brand reaches the point where its own name should be on the product, not just on the packaging. That is a bigger decision than it looks. One route builds a part to your exact drawing and specification. The other takes a proven platform and applies your brand identity, colors and packaging to it. Both are legitimate. They demand different amounts of engineering, different levels of investment and different levels of control — and picking the wrong one wastes either time or money.
2026 10 28
Prototype to Production: How Tooling and MOQ Work

Why your unit price changes when the tooling changes — and why MOQ exists at all
A first article comes back perfect. Then the brand asks for a price on a larger order and is surprised that the number per piece drops sharply — or, in some cases, that a supplier who was delighted to make one does not want to make twenty. Both reactions come from the same misunderstanding. Tooling and minimum order quantity are not arbitrary policies; they are the arithmetic that makes a shaped part possible in the first place. Once you see the mechanics, you can plan a production launch instead of guessing at it.
2026 10 27
What's Actually Included in a Welding Quote

The lowest number is rarely the lowest cost — here is what hides inside it
A purchasing manager sends the same welded assembly to five shops. Four quotes arrive within a narrow band. The fifth is dramatically lower, and it wins the order. Eight weeks later the parts arrive with undercut beads, inconsistent penetration, a heat tint nobody removed, and flanges that do not sit flat. The rework, the rejects and the delay cost more than the gap ever saved. Understanding what a welding quote is actually pricing is the difference between buying a weld and buying a finished part.
2026 10 26
Custom Manufacturing 101: From Drawing to Quote

What actually happens between sending a file and receiving a price
Most delays in custom manufacturing are not caused by machines or materials. They are caused by a file that cannot be read, a requirement that was never stated, or a decision that was left to the supplier to guess. The quote stage is where a project is won or lost, and the buyers who move fastest are the ones who understand how a manufacturer reads their request. Here is the whole journey, in the order it happens.
2026 10 23
Why Prepreg Carbon Fiber Outperforms Wet Layup

It is not the weave, the brand or the clear coat — it is the cure cycle
Two workshops can buy the same roll of carbon fabric, build the same shaped part, and produce laminates that behave like different materials. The gap does not come from the cloth. It comes from whether the resin was dosed before the layup and whether heat and pressure were applied on a defined schedule afterward. Prepreg is not simply a more expensive way to make a part — it is a different physics of manufacturing, and understanding it explains why the finished result is so much more predictable.
2026 10 22
Silicone, Fluorosilicone, Rubber or Aluminum: Choosing an Intake Material

The intake hose is doing five jobs at once — pick the material that can do all of them
Most intake discussions are about pipe diameter and filter flow. Meanwhile, the part that fails first is usually the coupling that joins everything together. An intake hose has to seal under vacuum, survive engine bay heat, resist oil mist and fuel vapor, flex with engine movement, and stay clamped without splitting. Four common materials handle that list in very different ways — and the cheapest one is rarely the one that lasts.
2026 10 19
Titanium vs Stainless Steel Exhausts: Weight, Sound and Cost

Three trade-offs that decide which system belongs on your car
Ask ten enthusiasts whether titanium is worth it and you will get ten confident answers, most of them about sound. Very few will mention where the weight actually sits, and almost none will mention repairability. Yet those are the factors that decide whether you are happy with the system in year three, not in week one. Titanium and stainless steel are both excellent exhaust materials. They simply reward different priorities, and the honest way to choose is to know exactly what each one is giving you.
2026 10 16
recommended for you
Founded in 2009 by Frank Cao, we have 4 specialized manufacturing facilities. Fupower has a total of more than 120 employees, and the total area of the four production facilities, warehouse and office space is 183,067 sq.ft. As of May 2026, our headquarters is in Shanghai, China.
Contact person: Frank
Contact number: 0086-18721636174
WhatsApp: 0086-18721636174
Company address: Room 806, Building 17, 2255 Yueluo Road, Shanghai, China
Copyright © 2026 Fupower   | Sitemap
Contact us
email
Contact customer service
Contact us
email
cancel
Customer service